P.S.1 when enter “ telephone number” can insert “*” key indicate pause, indicate extension number or page number, etc.
P.S.2 less three number is invalid.
P.S.3 first group number connect network center, if no network, first group number can delete.
P.S.4 Sixth number as user’s code, using network, usually address serial number, 6 digit number, not enough 6 digit, put “0” till 6 digit.
(2). Telephone deleting(Sign **1)
Example: to delete first group number, press “**1” #1 is ok.
(3) . Password setting method((Sign **1)
Pick up the phone, press “**1”,the main unit indicate “beep”, then setting password: press password (1---16 digit), press “#9) confirm.
P.S. above operating, press “##”, indicate operate is invalid, drop out setting.
(4).Voice message recording (Sign **5)
Pick up telephone or press “hand free”, press “**5” in the main unit, after “beep” indicate, talking into the main unit’s “MIC” port start record, after record 12second,telephone indicate “deep, du” voice, ,this is indicate record end, if want to stop record before end, press “#”.
(5) record test listen (Sign **6)
Pick up the phone or hand free, press “**5” in the main unit, after indicate “deep” voice repeating record, the voice end will indicate “ deep, du”, if want to stop test listen, press “#”, if not satisfying with the record, repeating above record operation.
(6) Main unit function setting(Sign **2)
after pick up phone, press follows key setting involved function:
**2 #1 when alarm, the main unit locale indicate silence (silence alarm)
**2 #2 when alarm, the main unit locale indicate siren (siren alarm)
**3 #3 when alarm, dial circulation times not limited.
**3 #4 when alarm, dial circulation three times.
**3 #5 phone line not connect, the main unit indicate silence.
**3 #6 phone line not connect, the main unit indicate siren.
(7) delete all function (Sign **7)
pick up phone or hand free, press “**7” in the main unit, after heard “ beep, beep ,beep” voice, indicated all the telephone number and remote code was deleted.( Notice: this function only used disarming).

2.Remote( or Door magnet, IR detector)( Sign **4)
pick up the phone, press “**4” in the main unit, after “beep” hang the phone, setting indicator light on, operate Remote, Door magnet, IR detector etc, one of them, let it launch sigh, here the indicator light on a little time and off, indicate study success, otherwise after 10 second the system drop out study status.

3. Remote operate
(1) Arming Via Remote Controller
A) outgoing arming, Press of the remote controller. A “beep” voice will acknowledge successful arming( siren alarm is active when any alarm is triggered). Function indicate light flash (2 second flash once), indicate first grade arming, delay 10 second the system enter arming status, the main unit receive the sign from detector , alarm immediately.

B) Partial arming(arming in home)
Press of the remote controller again, A “beep” voice will acknowledge successful arming( siren alarm is active when any alarm is triggered). Function indicate light flash (2 second flash twice), indicate second grade arming, delay 10 second the system enter arming status, the main unit receive the sign from detector (not include second defense area ),alarm immediately.

(2) Disarming
Before master enter house, press , the main unit send our “ beep,beep,beep”twice . Function light off, indicate system had disarming.

(3) Emergent alarm
Press the via remote, the main unit dial alarm number automatic.
Emergent alarm not limited arming or disarming

(4) Doorbell
Press of the remote controller, the main unit sent out ‘didu,didu” voice.

4.Doorbell:
Key stoke is normally closed contacts, press key-stoke, the main unit send” Didu,Didu….” When disarming. After arming delay, press key stoke, alarm immediately.. when alarm, siren is silence, after talk, press”9” start 12second siren.(doorbell and main unit sound same time)

5.Long-distance control (active control, this function require enter password)
In the long-distance( other city) control main unit, use phone or mobile dial main unit telephone number. After 6 time ringing, the main unit connect alarm system, enter password after main unit send “ Di”, enter ”#” confirm; if enter wrong password, repeating again after main unit clue on “ Di,Di,Di,Di,Di” , enter wrong password three times, telephone hung up automatically. If password is correct, after “Di,DI’ voice, setting and control as follows:
(1) Press “*” listen or afresh listen record.
When record not clear or imperfect, press “*” listen 10 second record again.
(2) Press “8” listen in location, talk . two way talk 32second)
(3) Press “9” turn on siren.
Turn on siren directly, the main unit send 12 second siren after press “9” every time.
(4) Press “1” enter first grade arming,( all arming), warning tone ”Di”;
(5) Press “2” enter second grade arming( part arming), warning tone “Di,Di”;
(6) Press “3” disarming, warning tone” Di,, Di, Di”
(7) Press “# #”, the main unit hung up.
When all operation over, press two times “# #”( within 2 second) main unit hung up automatically. Above operation, if not press any key in the 16 second, main unit hung up automatically.

6. Answering alarm operation
Received alarm telephone, receiver operate alarm phone achieve follows function:
a) Press “*” listen or repeating listen record.
When record not clear or imperfect, press “*” listen 10 second record again.
(2) Press “8” listen in location, talk . two way talk 32second)
(3) Press “9” turn on siren.
Turn on siren directly, the main unit send 12 second siren after press “9” every time.
(4) Press “# #” stop siren.
When receiver confirmed location status and site, dispense with continue alarm, press twice “ # #”( within 2 second), stop siren and recover arming status.
Notice: above function repeat no limed. If not press any key with 10 second when one function finished, the main unit hung up automatically, dial another alarm telephone.

7. defense area setting

Notice :
1. Second defense area is indoor defense area.
2. Third defense area not limited arming or disarming.

Back to top